Epoxy Adhesive 1k:

One Component Epoxy Compound

Epoxy Adhesive 1K is a single component Epoxy Resin based compound developed for Auto Electrical, Electronics and Medical applications

    Tertiary Amine Hardner based system
    Excellent Thixotropy
    Good adhesive properties and flexibility
    Long shelf life
    Faster curing
    Excellent Adhesion to Plastics and Metals

Properties

    Cable Fittings
    URECAST-FR is ideally used in the manufacture of cable sleeves and sealing ends
    Color and Appearance : Coloured*, thixotropic, paste consistency
    Viscosity mPa.s at 27°C : 40,000 - 1,00,000

Method Of Application

    The compound could be applied by Dispenser, spatula or brush on the preheated component.

Curing Schedule

    100°C/ 40 min OR 130°C / 30 min

Uses

    Armature coating of starter motors
    For fixing components of magnetos
    Disposable syringe needle joining

Storage Condition And Shelf Life

    The Epoxy Adhesive 1K has Shelf life of 1 month if stored at temperature of between 15 to 20°C

Safe Handling

    Epoxy Adhesive 1K has hardly any effect on the skin & mucous membrane. Direct contact, however, should be avoided by using rubber gloves & goggles. Affected area of the skin should be scrubbed with 5% acetic and washed with plenty of water & soap.

Packing

    1kg, 4 kg, in MS Tins
    * Available in Red/White/ Blue colour

Salient Features

    Epoxy Adhesive 1K is a one component, coloured , heat curing epoxy resin compound. No Hardner is required to be added externally, since this is already incorporated. Epoxy Adhesive 1K is thixotropic and available in paste consistency Epoxy Adhesive 1K is suitable for consolidation of windings of electrical machines such as rotors of alternators. Epoxy Adhesive 1K can be applied by brushing or spatula. Warming of Epoxy Adhesive 1K up to 60 & 70°C during application may facilitate during interlayer brushing application