We are the manufacturer of sheet/ Brass metal components for our customer and supplying all over 

...

Main Characteristics:       

 Two-part, high bonding strength, fast cure, can bond oil surface, and the layer as solid as iron after cured a few minutes, can bond a variety of substrates, especially for bonding hard-plastics substrates.
 

Application:

 Bond and assemble of plastics panels, oil pumps, water pumps, bumpers, dashboards, industrial tanks and pipes in cars, automobiles, and farm machines. Also, it can bond in elevators, machines, artifacts, and wooden products.

 

Directions:

1.The uncoated surfaces should be clean and dry.

2.Spin the nozzle and puncture the seal by it cap, Squeeze out equal amount of glue from A and B tubes and mix thoroughly.(Don’t mix the glue with large quantity at one time)

3.Coating the mixed adhesive on the preparing surfaces, the initial curing of adhesive in 5~10 min at room temperature, after 10~30 min, it get working strength.

4.This product can be used at any temperature between -60°c~200°c

 

 Attention:

1.Keep out of reach of children.

2.Use the glue in adequate ventilated place, it can produce acrylic irritating odor during operation.

3.Store in dry and cool place, keep away from heating and fire. 

...

Maxx Bond, An offering from Glob Construction Chemical, is thin bed high Strength,Premixed, Quality assured mortarcompressing of ordinary Portland Cement Specially graded sand and polymer. It is specially formulated and easily applied, giving a better bonding with AAC Block, Hollow Blocks Flyash Bricks

Area Of Application:

• To join fly ash bricks, cement block, hollow block, AAC block etc.
• Joining to concrete windows and doorframe etc.

 

Important Features & Advantage:

• Pre-mixed Ready to use, only need to add water at site
• High Water Retention Capability
• High Bonding Strength due to Polymer Modification of Mortar.
• No Water Curing is required after construction of wall.
• Thin Joint Application Prevent Shrinkage Cracks.
• Due to Pre — Mixed Its save times for Lengthy process like mixing materials, transport and separate inventory of material.
• Plastering can be done after 24 hrs. Of application.

 

Benefits:

• Cost Saving
• Easy To use
• Saves Times & Energy

Surface Preparation:

• Pre- Wet the Block before Applying Maxx bond
• The block, brick should be Clean Free from dust, voids, oil and grease etc.
• Ensure that the surface is flat. structurally strong and free from any other contamination which could reduce the bond strengt.

 

Mixing:

• Take the required quantity of water in a clean bucket; add Maxx bond Jointing Mortar.
• Mix the product with water in the ratio of approximately 1:3.
• Always Powder add into Water.
• Mixing can be done manually or by stirrer continuously for 5 — 10 minutes to obtain a homogeneous lump free Mix Mortar.
• After proper mixing, leave the paste for 5-10 minutes for polymeric dispersion before application.
• Use this paste within 90 Min.

Method Of Application:

• Make Leveling of First Layer perfectly.
• Apply Maxx bond uniformly on the Surface
• Apply vertical face and horizontal joint of each block with 3 to 4 mm thickness
• Ensure that proper Contact Between two Block.
• Clean the Excess Materials.

 

...