Sufi Structural Tata MS Pipe in Pune

Stainless Steel Matt Tube Pipe Flaring

Pipe flaring is the process through which we can expand the outside diameter of end of the pipe without disturbing the actual diameter of the whole pipe.

The pipe is placed inside the dye which then closes and the punch hole which has bigger diameter is inserted into the pipe and the flaring process is complet

...

Star Trace Concentrator Separators

We are one of the leading manufacturers and suppliers of the highest quality concentrator separator, which are manufactured using the finest quality raw material to ensure quality of products and customers’ satisfaction.

Application:

Permanent magnetic concentrator separator is extensively used for advancing or concentrating material containing a very high percentage of magnetic or where magnetic/mechanical agitation is required for the separation of many difficult materials. It is perfect for the improving sponge iron/cast iron borings, steel/brass aluminum turnings, chips and for mineral beneficiation application such as the purification of dry ceramic and refractory materials, reclamation of abrasive grains, removal of iron contamination from chemical powders and grains and for many other such applications requiring maximum separation with minimum production loss etc.

Description:

The separator basically consists of:

An electromagnetic vibratory feeder (with sub-hopper), which provides step less regulation of feed for even flow.
Two conveyor belts the upper belt running ahead of the lower conveyor belt and in the same direction.
Permanent magnet unit for picking tramp iron.
Magnetic and non-magnetic collection hopper
The drive.
The supporting structure.

The material to be treated is fed from the vibratory feeder on to lower belt where after traveling a short distance it comes under the belt conveyor. The upper belt conveyor runs under a series of powerful concentrator separator arranged in such a manner so that the material is exposed during its travel through a number of magnetic fields of alternating polarity. Due to the continuous repetitive agitation of the material nonmagnetic material falls back on to the lower conveyor belt, while the magnetic material is retained on the upper conveyor belt due to the force of magnetic attraction. The separated material are carried and deposited into the respective magnetic and non-magnetic discharge chutes.

Manufacturing range:

The concentrator separator is available in a wide range of sizes and capacities up to approx. 100 tph and 650mm belt width up to 2000mm belt width.

Options available at extra price:

A variable speed drive motor can be furnished in place of the slandered constant motor if varied products are to be handled.
The built-in feeder and motor starter can be furnished separately for remote mounting where remote control is desired.
Multiple-stage units can be supplied for unusually difficult materials.
Other sizes on request.

Note: Technical data specification subject to change. Special concentrator separator can be made on request, customers have to just send us their technical data and application.

...

Single Raw Roller Bearings, Bore Size: 80 mm

We are the manufacturer of Industrial Roller Bearing. We deals in best quality of Industrial Roller Bearing. We deals in PAN India.

...

Texyear Industrial Grade UL94V-0 Hot Melt Glue Stick

UL94V-0 Hot Melt Glue Stick is mainly applied to electrical and electronic components fixing, small appliances assembly, etc.

List of UL94V-0 Hot Melt Glue Stick:
High bonding strength and wide bonding materials: This polyolefin hot melt glue stick is applicable to all types of electronic products assembly, component fixing, filler, etc.

Hot Melt Adhesive that is in Compliance with UL94V0 flame retardant: Every year we will accept the sampling and testing of UL laboratory to comply with UL Laboratory certification(UL Certificate number: E209485)
High Temperature Resistant: The softening point of 914W is at 152 ℃ and its heat resistance can reach up to 110 ℃
Compliance with ROHS: The non-volatile, environmental friendly enable this hot melt adhesive to meet the requirement of ROHS. It has no solvent problem, and doesn't contain heavy metals.
Great operational performance & cost saving: Its curing time is very short. From coating to curing, it takes only few seconds to two minutes to reach its initial strength.
Excellent Dielectric property of Electric Appliance: Its voltage resistance can reach 25KV on destruction test.

...

Brand	Sufi Structural
Material	MS
Surface Treatment	Galvanized
Pipe Section	Rectangular
Unit Pipe Length	6 meter
Product Thickness	25mm
Country of Origin	Made in India
Minimum Order Quantity	1000 Kg

Sufi Structural Tata MS Pipe

Feature

Description

Related Products

Stainless Steel Matt Tube Pipe Flaring

Star Trace Concentrator Separators

Single Raw Roller Bearings, Bore Size: 80 mm

Texyear Industrial Grade UL94V-0 Hot Melt Glue Stick

Overall Rating

Rating Distribution

Submit Your Review

Sufi Structural Tata MS Pipe

Feature

Description

Related Products

Stainless Steel Matt Tube Pipe Flaring

Star Trace Concentrator Separators

Single Raw Roller Bearings, Bore Size: 80 mm

Texyear Industrial Grade UL94V-0 Hot Melt Glue Stick

Overall Rating

Rating Distribution

User Reviews

Nilam

Rutuja

Pradnya

Monali

Submit Your Review