× For Buying For Selling Post Product Free Raise Your Complaint Post Requirement Verified Bussiness Buyer Product/Services Directory Share Your Feedback

Magnetizers for Magnetos

incl. GST

These Equipments work on the principle of Capacitor Discharge hence Creating Large Unidirectional Currents into small Magnetization Fixtures which gives rise to Magnetic Induction in the Permanent Magnets of Ferrite Alnico and rare Earths. As the magnetization head (fixture) is a very vital part of the Magnetizing Unit care is taken for its cooling.

Description

These Equipments work on the principle of Capacitor Discharge hence Creating Large Unidirectional Currents into small Magnetization Fixtures which gives rise to Magnetic Induction in the Permanent Magnets of Ferrite Alnico and rare Earths. As the magnetization head (fixture) is a very vital part of the Magnetizing Unit care is taken for its cooling.

Related Products
En8d/ 20 Mn Cr5 Ferrous Forging

We are instrumental in offering optimum quality Ferrous Forging to our valuable customers. For the purpose of manufacturing the offered forgings in conformity with the international quality standards, latest and ultra-modern machinery is used. Their resistance to corrosion, impeccable finish, high tensile strength and durability, make these forgings highly demanded.
 

...
Star Trace Concentrator Separators

We are one of the leading manufacturers and suppliers of the highest quality concentrator separator, which are manufactured using the finest quality raw material to ensure quality of products and customers’ satisfaction.

Application:
 

  • Permanent magnetic concentrator separator is extensively used for advancing or concentrating material containing a very high percentage of magnetic or where magnetic/mechanical agitation is required for the separation of many difficult materials. It is perfect for the improving sponge iron/cast iron borings, steel/brass aluminum turnings, chips and for mineral beneficiation application such as the purification of dry ceramic and refractory materials, reclamation of abrasive grains, removal of iron contamination from chemical powders and grains and for many other such applications requiring maximum separation with minimum production loss etc.


Description:

The separator basically consists of:
 

  • An electromagnetic vibratory feeder (with sub-hopper), which provides step less regulation of feed for even flow.
  • Two conveyor belts the upper belt running ahead of the lower conveyor belt and in the same direction.
  • Permanent magnet unit for picking tramp iron.
  • Magnetic and non-magnetic collection hopper
  • The drive.
  • The supporting structure.


The material to be treated is fed from the vibratory feeder on to lower belt where after traveling a short distance it comes under the belt conveyor. The upper belt conveyor runs under a series of powerful concentrator separator arranged in such a manner so that the material is exposed during its travel through a number of magnetic fields of alternating polarity. Due to the continuous repetitive agitation of the material nonmagnetic material falls back on to the lower conveyor belt, while the magnetic material is retained on the upper conveyor belt due to the force of magnetic attraction. The separated material are carried and deposited into the respective magnetic and non-magnetic discharge chutes.

Manufacturing range:
 

  • The concentrator separator is available in a wide range of sizes and capacities up to approx. 100 tph and 650mm belt width up to 2000mm belt width.


Options available at extra price:
 

  • A variable speed drive motor can be furnished in place of the slandered constant motor if varied products are to be handled.
  • The built-in feeder and motor starter can be furnished separately for remote mounting where remote control is desired.
  • Multiple-stage units can be supplied for unusually difficult materials.
  • Other sizes on request.


Note: Technical data specification subject to change. Special concentrator separator can be made on request, customers have to just send us their technical data and application.

...
GRAYWOLF VOC Monitor

Volatile Organic Compounds (VOCs) emanate from a broad range of sources in industrial and general indoor air quality (IAQ) applications. GrayWolf offers four different Photo Ionization Detector (PID) sensors to choose from; optimized for your specific application. Our TG-502 probe also includes sensors for relative humidity, temperature and up to 3 specific gas electrochemical sensors, while the TG-503 probe offers sensors for NDIR carbon dioxide, relative humidity, temperature and up to 2 specific gas electrochemical sensors. Coupled with the power of mobile computing, end-users can efficiently log and annotate readings, while easily accessing on-board information about specific volatiles and potential sources.

  • Choice of low ppb, low ppm, mid range ppm or wide/high range ppm VOC optimized PID sensors
  • Excellent sensitivity, very low limits of detection (down to 5 ppb)
  • Ideal for screening for if/when and where air sampling might be advised
  • Rapid response; ideal for "blood hounding" VOC sources
  • %RH and C/F are also included; add up to 3 additional specific gas sensors in one probe
  • Connect to a GrayWolf manufactured embedded PC instrument (AdvancedSense™ or WolfPack™), a GrayWolf supplied WIN Mobile Pocket PC, WIN 7 tablet/netbook PC or to your own Laptop/Notebook PC
  • Log portable spot measurements, or monitor and record data unattended over time in secure trend data-logger housing
  • Store enhanced survey information; data and text, audio, drawings, video notes and more...
  • On-board list of potential sources of measured VOC levels and other useful info
  • Almost all Total VOCs (TVOCs) of concern for IAQ situations are detected.
  • On-board correction values for specific volatiles versus calibration compound
  • Optional GrayWolfLive™ webhosting allows remote access to logged and real-time data (plus notes) via WiFi from almost anywhere and on almost any internet enabled device
  • Load your own application related documents or procedures (.pdf, Word, HTML, etc.)
  • Software handholds users through calibration procedure; even includes an on-board video
  • Extremely easy to use
  • Desktop data analysis and reporting software is included.
...

Overall Rating

★★☆☆☆

2 out of 5 (4 reviews)

Rating Distribution

5 ★
0 reviews
4 ★
0 reviews
3 ★
1 reviews
2 ★
2 reviews
1 ★
1 reviews

Last review on 21 Jan 2025

Submit Your Review

10294

Electric Impulse Magnetizer

Verified 2 Years 5 reviews

Rs. /per piece Get Latest Price
Paid shipping

10296

Electromagnetic Parmanent Magnetic Lifter

Verified 1 Years 30 reviews

Rs. /per piece Get Latest Price
Paid shipping

10298

Magnetizers for Magnetos

Verified 1 Years 27 reviews

Rs. /per piece Get Latest Price
Paid shipping

10302

Magnetizer

Verified 1 Years 7 reviews

Rs. /per piece Get Latest Price
Paid shipping

Delivering the latest product trends and industry news straight to your inbox

We’ll never share your email address with a third-party.