M S 3phase Hydraulic 8 Meter 25mm Thickness Rollin

Chamfering and Deburring Gears Precisely
Gears need to be Chamfered and Deburred with a controlled, high quality process for the following areasons:
·        To avoid breakage – Excessive carburizing along the tooth edges can often cause breakage when the gear is running
·        To avoid damaging gears and bearings – If burrs are not removed, they may chip off during the running cycle and cause damage to the other gears and bearings.
·        To avoid poor tool life in the finishing processes
·        Removal of very sharp burrs reduces the risk of tool handling injuries
 Gear Before and After Chamfering / Deburring
Gear with Big Burr
Chamfering Specified on Gears is of following types: in only one or in both flanks, with a constant size along the profile, with or without chamfer in root diameter. Sometimes a further Rolling Operation is required (refer section on Rolling below)