10 Pcs Button Fridge Magnets

• Material : Plastic + Magnet
• Product Weight : 40 gms
• Product Dimensions: 3 x 3 x 0.5 Cm (1 Pc)
• Packaging Dimensions : 10 x 8 x 4 Cm
• Package Content: 10 Pcs

Nitotile GPX

High Performance modifi ed tile adhesiveUsesNitotile GPX is a grey cementitious based high quality adhesivefor the permanent fi xing of ceramic and vitrifi ed tiles havingporosity less than or equal to 3% for both internal & external applicationof tiles for wet area, dry area & submerged conditions.It is suitable for fi xing tiles of size upto up to 600 mm X 600mm 90 MinsExtended Open Time >15 MinsNote: The typical physical properties given above are derivedfrom testing in a controlled laboratory environment . Resultsderived from testing fi eld-applied samples may vary, dependenton actual site conditions.

Technical supportFosroc off ers a comprehensive technical support service tospecifi ers, end users and contractors. It is also able to off eron-site technical assistance, an AutoCAD facility and dedicatedspecifi cation assistance in locations all over the world.Instructions for useSurface preparationAll surfaces must be sound and thoroughly clean before NitotileGPX is applied. All traces of grease or oil must be removedwith a chemical degreaser. All loose particles of mortar, oldwallpaper, paint etc. must be physically removed.Make sure the substrate is fl at and in sound conditions toachieve uniform thickness & coverage. If level variation onfl oor or wall is more than an average 12 mm ( Excluding intentional),surface preparation as required to bring the surfacetrue to plumb level shall be taken up with appropriate materialSaturate the surface thoroughly and remove excess waterbefore the application of Nitotile GPX.For porous substrates, it is recommended to use suitable primer.SurfacesNitotile GPX can be applied directly on concrete, cementscreeds, & cement plaster. Special attention must be given tonew construction prior to commencing tiling. Tiles should notbe placed on concrete or brickwork until all shrinkage movementhas taken place.MixingNitotile GPX should be mixed with clear potable water in thewater powder ratio of 0.25 to 0.28. A slow speed drill fi ttedwith a mixing paddle is recommended for mixing. Add powderto water and mix until a uniform, lump-free consistency isachieved. The total quantitiy of water may be slightly adjustedto achieve the required consistency.Pack Size (Kg) Water required (Liters)20 5 to 5.640 10 to 11.2

Backed by a rich industrial experience, we have come up with a world class assortment of PVC Cable Scrap. These are properly checked before finally shipping them to our clients. 

We are the manufacturer of hot melt adhesive for different kind of industry from Mumbai For more details kindly contact us