EATON MTL 5521 LOOP POWERED SOLENOID / ALARM DRIVER MTL5521
Brand:EatonModel:MTL 5521MPN:MTL5521, MTL 5521, 5521
WE CAN ALSO DEAL BELOW PRODUCTS
| MTL5521 |
| MTL5073 |
| MTL5043 |
| Material | Casting |
| Dimensions (LxW or Dia) (mm) | 10.98cm x 1.58cm x 12.36cm |
| Rated Voltage | . 20 to 35V dc |
| BRAND | EATON |
| Minimum Order Quantity | 1 Piece |
EATON MTL 5521 LOOP POWERED SOLENOID / ALARM DRIVER MTL5521
Brand:EatonModel:MTL 5521MPN:MTL5521, MTL 5521, 5521
WE CAN ALSO DEAL BELOW PRODUCTS
| MTL5521 |
| MTL5073 |
| MTL5043 |
Red, high strength, medium viscosity, methacrylate-based threadlocking adhesive with high temperature resistance. Loctite 272 is a red, medium viscosity, methacrylate-based threadlocking adhesive with high strength. With a fixture time on steel of 10 min, brass 5 min and stainless steel 15 min, it is ideal for applications where any migration of the adhesive must be prevented. Can tolerate slight contaminations of industrial oils. Suitable for all metal fasteners. It has a breakaway torque on M10 bolts of 23 Nm.
...
We are offering PP Soft Belt Brush to our client.
| Brand | Ramchet Brush Industries |
| Color | White |
| Country of Origin | Made in India |
| Bristle Length | 12 mm |
| Brush Length | 30 inch |
| Base Material | Leather |
| Bristle Stiffness | Soft |
Alnico Magnets :
These have excellent temperature stability coupled with high residual induction. High energies characterize alnico materials that are primarily composed of alloys of aluminum, nickel and cobalt. The alnico magnets are manufactured through two different processes like casting or sintering. The cast magnets can be manufactured in different complex shapes like horseshoes, which is not possible with other magnet materials. On the other hand sintered alnicos offer comparatively lower magnetic properties but better mechanical characteristics than cast alnicos. One of the most commonly used of all cast
Alnicos is cast alnico 5, which is extensively used for various applications like rotating machinery, meters, instruments, sensing devices, and holding applications, to name a few. Machining or drilling cannot be accomplished by ordinary methods as alnico is hard and brittle material. The holes are cored in at the foundry and the magnets are cast close to final size before machine finishing to closer tolerances. It also has a low coercive force, and can be easily demagnetized if not handled properly.(Alnico Magnets) To obtain maximum performance of alnico 5, its magnetic length has to be approximately 5 times its pole diameter or equivalent diameter.
Manufacturing methods these magnets are manufactured using different processes such as casting or sintering. The cast magnets are manufactured by pouring a molten metal alloy into a mold and then further processing it through various heat-treat cycles. The resulting magnet has a dark gray exterior appearance, and may have a rough surface.The machined surfaces have a shiny appearance similar to steel. Sintered magnets are manufactured by compacting fine alnico powder in a press, and then sintering the compacted powder into a solid magnet.
Delivering the latest product trends and industry news straight to your inbox
We’ll never share your email address with a third-party.