LORD® 606 acrylic adhesive when cured with LORD Accelerator 6 or 6GB creates a fast-setting adhesive system that will bond composites including DCPD (dicyclopentadiene) resin and modified DCPD resin based FRP (fiber reinforced plastic). This mixed adhesive can also cross-bond composites to many metals.
LORD 606 adhesive in combination with LORD Accelerator 6 or 6GB utilize a unique patented technology to create exceptionally strong bonds with excellent surface cure and minimal surface preparation.
LORD 606 adhesive can be mixed with either LORD Accelerator 6 or LORD Accelerator 6GB. LORD Accelerator 6GB allows precise control of the adhesive bondline thickness due to its content of glass beads.
Shelf Life
Shelf life is six months when stored below 80°F (27°C) in original, unopened container. Storage temperatures of 40-50°F (4-10°C) are recommended. If stored cold, allow product to return to room temperature before using. Protect from exposure to direct sunlight.
LORD 606 adhesive is flammable. Do not store or use near heat, sparks or open flame.
Features and Benefits
Versatile – bonds difficult-to-bond composites, such as DCPD based FRP, and a wide range of metals with minimal surface preparation.
Environmentally Resistant – resists dilute acids, alkalis, solvents, water immersion, moisture and weathering.
Gap Filling Capability – fills gaps as large as 0.5-1.0 inch (12.7-25.4 mm).
Non-Sag – remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility.
...
