Bakelite ( Hylam ) is a tough and versatile engineering material for electrical and mechanical use. It is light in weight, a good electrical insulator, and resistant to water and chemical. Bakelite (Hylam) are used where mechanical strength, wear resistance and resilience are more important than electrical insulation. Typical applications of fabric laminates are gears, textile shuttles, bearings, pickers, bushes and marine application.
| Finish | Polished |
| Rod Diameter | 6 mm to 200 mm |
| Thickness | 0.5 to 50 mm |
| Available Length | 500 mm or 1000 mm |
Bakelite ( Hylam ) is a tough and versatile engineering material for electrical and mechanical use. It is light in weight, a good electrical insulator, and resistant to water and chemical. Bakelite (Hylam) are used where mechanical strength, wear resistance and resilience are more important than electrical insulation. Typical applications of fabric laminates are gears, textile shuttles, bearings, pickers, bushes and marine application.
Matching up with the requirements of our clients, we are involved in offering single phase Vibrator Motors.
...
|
Cell Configuration |
3.2 V 6000 mAh |
|
|
Cell Make |
Fb Tech |
|
|
Pack combination |
4S4P |
|
|
Nominal Capacity |
24 Ah |
|
|
Nominal Voltage |
12.8 V |
|
|
Internal Impedance |
≤12mΩ |
|
|
Discharge Cut-off Voltage |
10 V |
|
|
Max Charge Voltage |
14.4 V |
|
|
Continuous Charge Current |
4.8 A |
|
|
Max. Continuous Charge Current |
12 A |
|
|
Continuous Discharge Current |
4.8 A |
|
|
Max. Continuous Discharge Current |
12 A |
|
|
Life Cycles (90 % DOD) |
2000+ |
|
|
Dimension (All dimensions are in mm) |
Box Type |
133x70x145 |
|
Flat Type |
133x133x75 |
|
|
Weight |
||
|
Battery Protections |
Over charge protection |
|
|
Over discharge protection |
||
|
Over current protection |
||
|
Cell balance function |
||
Jayant Impex Pvt Ltd, Mumbai, India is engaged in Industrial supplies can offer wide range of Pipe Fittings and Plumbing Fittings from ready stock or on make to order basis are currently supplying to UK, Iran(Tehran), Saudi Arabia, Spain, Bahrain, Nigeria, Dubai, Egypt, Malaysia, etc. various steel products such as Angles, Channels, Beams, Billets, Blooms, Round Bars, Square Bars, Rectangular Bars, Flat Bars, Forged Bars, Rolled Bars, Concast Bars, Pipe Flanges, Elbow, Tee, Reducer, Cross, Stub End, End Caps, Forged Stampings, Pipes, Tube, Tubing, Fasteners, Bolts, Nuts, Washers, Screws, Studs, Plates, Sheets, Coil, etc.
Specifications: Can offer Pipe Fittings and Plumbing Fittings as forged, normalized, annealed, quenched (hardened) tempered condition with black or bright finish.
...
Delivering the latest product trends and industry news straight to your inbox
We’ll never share your email address with a third-party.