Usage/Application | Paper Cup Production |
Automation Grade | Automatic |
Warranty | 1 Year |
Phase | Single Phase |
Capacity | 2 Lakh Piece / 8 hour |
Machine Type | Multiple Sizes |
Voltage | 220 V |
Driven Type | Panal |
Material | Mild Steel |
Type. D1-Loom, OD-11 SC/25Year 1995 Serial No 8063W.W. 2.5 meter or 98” set up for 72”Needling from topDensity 15 needles per square inch,Voltage incoming 575 3/ phase into transformer (supplied)output 400 volts 3 /phase to Needle loom
...Chamfering and Deburring Gears Precisely
Gears need to be Chamfered and Deburred with a controlled, high quality process for the following areasons:
· To avoid breakage – Excessive carburizing along the tooth edges can often cause breakage when the gear is running
· To avoid damaging gears and bearings – If burrs are not removed, they may chip off during the running cycle and cause damage to the other gears and bearings.
· To avoid poor tool life in the finishing processes
· Removal of very sharp burrs reduces the risk of tool handling injuries
Gear Before and After Chamfering / Deburring
Gear with Big Burr
Chamfering Specified on Gears is of following types: in only one or in both flanks, with a constant size along the profile, with or without chamfer in root diameter. Sometimes a further Rolling Operation is required (refer section on Rolling below)
Delivering the latest product trends and industry news straight to your inbox
We’ll never share your email address with a third-party.