☰
× For Buying For Selling Post Product Free Raise Your Complaint Post Requirement Verified Bussiness Buyer Product/Services Directory Share Your Feedback
Registered Users
10780
For Buying For Selling Share Your Feedback Raise Your Complaint
Home Post Requirement Verified Bussiness Buyer Product/Services Directory Post ProductFree
Post Requirement Post Your Product Free
  1. Home
  2. Industrial Supplies
  3. Adhesives, Glue and Sealants
  4. Hot Melt Adhesives
  5. Aeroseal Adhesive For Aeroflex Insulation, Packaging Type: Tin, 3.5 Litre

Aeroseal Adhesive For Aeroflex Insulation, Packaging Type: Tin, 3.5 Litre

3500 incl. GST
Packaging Size 3.5 Litre
Packaging Type Tin
Storage Temperature Range +5 to +35 Degree Celsius
Brand Aeroflex
Specific Gravity 0.88 - 0.90
Appearance Black Vscous Liquid
Features Heat Resistant
Total Solids 22+/-2%
Viscosity 3500 - 4500 Cps at 25 Degree Celsius
Minimum Order Quantity 10 Tin
Feature
Packaging Size 3.5 Litre
Packaging Type Tin
Storage Temperature Range +5 to +35 Degree Celsius
Brand Aeroflex
Specific Gravity 0.88 - 0.90
Appearance Black Vscous Liquid
Features Heat Resistant
Total Solids 22+/-2%
Viscosity 3500 - 4500 Cps at 25 Degree Celsius
Minimum Order Quantity 10 Tin
Description

AEROSEAL is a Modified Neoprene Contact Adhesive specially formulated for bonding Aeroflex Insulating Materials firmly together. Also, ideal for use with other materials like Metal (painted / unpainted), Cork Board, Polyurethane Foam Rigid PVC Sheet, Formica, and Melamine Board and Rubber Sheet. The high water vapor resistance and good weathering properties of AEROSEAL can prevent water or moisture from penetrating through the joining points. AEROSEAL is able to form a strong, firm and permanent bonding between the applied materials providing long lasting service.

Application - 

  • Surfaces of materials to apply should be dry, clean and free from dust, grit, oil, grease or any other loose materials.
  • Stir AEROSEAL well before applying a thin and even coat of AEROSEAL onto both joining surfaces by using a short hair brush, spreader or metal blade.
  • Allow solvents content of AEROSEAL to evaporate until the adhesive becomes dry to touch, but tacky, before joining the materials together normally 5-30 minutes.
  • Bonding is possible within 2 minutes after application if used on absorbent or permeable materials such as, Aeroflex Insulation, cork board and chipboard. If applied on non-absorbent or non-permeable materials like rubber or metal, a minimum of 5 minutes should be allowed to elapse before the surfaces can be bonded.
  • Press the surfaces to be bonded together under firm pressure.
Related Products

Overall Rating

☆☆☆☆☆

0 out of 5 (0 reviews)

Rating Distribution

5 ★
0 reviews
4 ★
0 reviews
3 ★
0 reviews
2 ★
0 reviews
1 ★
0 reviews

Last review on No reviews yet

Submit Your Review

find relevant seller for related products


Joshi & Co
Aeroseal Adhesive For Aeroflex Insulation, Packaging Type: Tin, 3.5 Litre

Verified 4 Years 40 reviews

Manufacturer/Supplier

Pune

Flat No. B-09, 2nd Floor, Shripad Heights, Ambegaon BK Pune - 411046, Maharashtra, India

Rs. 3500 /per piece | Paid shipping Get Latest Price
Laxmi Hardware
Pidilite DHR_080 Fevicol SH Synthetic Resin Adhesive

Verified 3 Years 10 reviews

Manufacturer/Supplier

Pune

Flat No. B-09, 2nd Floor, Shripad Heights, Ambegaon BK Pune - 411046, Maharashtra, India

Rs. 260 /per piece | Paid shipping Get Latest Price
Chintamani Traders
Fevicol Synthetic Resin Adhesive

Verified 1 Years 41 reviews

Manufacturer/Supplier

Pune

Flat No. B-09, 2nd Floor, Shripad Heights, Ambegaon BK Pune - 411046, Maharashtra, India

Rs. 160 /per piece | Paid shipping Get Latest Price

Delivering the latest product trends and industry news straight to your inbox

We’ll never share your email address with a third-party.
//